Harmonized Tariff Schedule

Heading/ Subheading	Stat Suffix	Article Description	Unit of Quantity	Rates of Duty
				1		2
				General	Special	2
7301		Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel:
7301.10.00	00	Sheet piling	kg	Free 1/ 1/		2%
7301.20		Angles, shapes and sections:
7301.20.10	00	Of iron or nonalloy steel	kg	Free 1/ 1/		20%
7301.20.50	00	Of alloy steel	kg	Free 1/ 1/		28%
7302		Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails:
7302.10		Rails:
7302.10.10		Of iron or nonalloy steel		Free 1/ 1/		1%
		New:
		Not heat treated:
7302.10.10.10	10	Standard tee rails over 30 kg per meter	kg
		Other:
7302.10.10.15	15	Over 30 kg per meter	kg
7302.10.10.25	25	Other	kg
		Heat treated:
7302.10.10.35	35	Standard tee rails over 30 kg per meter	kg
		Other:
7302.10.10.45	45	Over 30 kg per meter	kg
7302.10.10.55	55	Other	kg
		Used:
7302.10.10.65	65	Railway rails for rerolling	kg
7302.10.10.75	75	Other	kg
7302.10.50		Of alloy steel		Free 1/ 1/		9%
7302.10.50.20	20	New	kg
		Used:
7302.10.50.40	40	Railway rails for rerolling	kg
7302.10.50.60	60	Other	kg
7302.30.00	00	Switch blades, crossing frogs, point rods and other crossing pieces	kg	Free 1/ 1/		45%
7302.40.00	00	Fish-plates and sole plates	kg	Free 1/ 1/		2%
7302.90		Other:
7302.90.10	00	Sleepers (cross-ties)	kg	Free 1/ 1/		2%
7302.90.90	00	Other	kg	Free 1/ 1/		45%
7303.00.00		Tubes, pipes and hollow profiles, of cast iron		Free 1/		33%
7303.00.00.30	30	Soil pipe	kg
7303.00.00.60	60	Pressure pipe with an inside diameter of less than 356 mm	kg
7303.00.00.90	90	Other	kg
7304		Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel:
		Line pipe of a kind used for oil or gas pipelines:
7304.11.00		Of stainless steel		Free 1/ 1/		35%
7304.11.00.20	20	Having an outside diameter not exceeding 114.3 mm	kg
7304.11.00.50	50	Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm	kg
7304.11.00.80	80	Having an outside diameter exceeding 406.4 mm	kg
7304.19		Other:
7304.19.10		Of iron or nonalloy steel		Free 1/ 1/		25% 1/
7304.19.10.20	20	Having an outside diameter not exceeding 114.3 mm	kg
7304.19.10.30	30	Having an outside diameter exceeding 114.3 mm but less than 215.9 mm	kg
		Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm:
7304.19.10.45	45	Having a wall thickness less than 12.7 mm	kg
7304.19.10.60	60	Having a wall thickness of 12.7 mm or more	kg
7304.19.10.80	80	Having an outside diameter exceeding 406.4 mm	kg
7304.19.50		Of other alloy steel		Free 1/ 1/		35%
7304.19.50.20	20	Having an outside diameter not exceeding 114.3 mm	kg
7304.19.50.50	50	Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm	kg
7304.19.50.80	80	Having an outside diameter exceeding 406.4 mm	kg
		Casing, tubing and drill pipe, of a kind used in drilling for oil or gas:
7304.22.00		Drill pipe of stainless steel		Free 1/ 1/		35%
		Having an outside diameter not exceeding 168.3 mm:
7304.22.00.30	30	Having a wall thickness not exceeding 9.5 mm	kg
7304.22.00.45	45	Having a wall thickness exceeding 9.5 mm	kg
7304.22.00.60	60	Having an outside diameter exceeding 168.3 mm	kg
7304.23		Other drill pipe:
7304.23.30	00	Of iron or nonalloy steel	kg	Free 1/ 1/		25%
7304.23.60		Of alloy steel		Free 1/ 1/		35%
		Having an outside diameter not exceeding 168.3 mm:
7304.23.60.30	30	Having a wall thickness not exceeding 9.5 mm	kg
7304.23.60.45	45	Having a wall thickness exceeding 9.5 mm	kg
7304.23.60.60	60	Having an outside diameter exceeding 168.3 mm	kg
7304.24		Other, of stainless steel:
		Casing:
7304.24.30		Threaded or coupled		Free 1/ 1/		28%
		Having an outside diameter less than 215.9 mm:
7304.24.30.10	10	Having a wall thickness less than 12.7 mm	kg
7304.24.30.20	20	Having a wall thickness of 12.7 mm or more	kg
		Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
7304.24.30.30	30	Having a wall thickness less than 12.7 mm	kg
7304.24.30.40	40	Having a wall thickness of 12.7 mm or more	kg
7304.24.30.45	45	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm	kg
7304.24.30.80	80	Having an outside diameter exceeding 406.4 mm	kg
7304.24.40		Other		Free 1/ 1/		8.5% 1/
		Having an outside diameter less than 215.9 mm:
7304.24.40.10	10	Having a wall thickness less than 12.7 mm	kg
7304.24.40.20	20	Having a wall thickness of 12.7 mm or more	kg
		Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
7304.24.40.30	30	Having a wall thickness less than 12.7 mm	kg
7304.24.40.40	40	Having a wall thickness of 12.7 mm or more	kg
		Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
7304.24.40.50	50	Having a wall thickness less than 12.7 mm	kg
7304.24.40.60	60	Having a wall thickness of 12.7 mm or more	kg
7304.24.40.80	80	Having an outside diameter exceeding 406.4 mm	kg
7304.24.60		Tubing		Free 1/ 1/		35%
		Having an outside diameter not exceeding 114.3 mm:
7304.24.60.15	15	Having a wall thickness not exceeding 9.5 mm	kg
7304.24.60.30	30	Having a wall thickness exceeding 9.5 mm	kg
7304.24.60.45	45	Having an outside diameter exceeding 114.3 mm but less than 215.9 mm	kg
7304.24.60.60	60	Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm	kg
7304.24.60.75	75	Having an outside diameter exceeding 406.4 mm	kg
7304.29		Other:
		Casing:
		Of iron or nonalloy steel:
7304.29.10		Threaded or coupled		Free 1/ 1/		20% 1/
		Having an outside diameter less than 215.9 mm:
7304.29.10.10	10	Having a wall thickness less than 12.7 mm	kg
7304.29.10.20	20	Having a wall thickness of 12.7 mm or more	kg
		Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
7304.29.10.30	30	Having a wall thickness less than 12.7 mm	kg
7304.29.10.40	40	Having a wall thickness of 12.7 mm or more	kg
		Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
7304.29.10.50	50	Having a wall thickness less than 12.7 mm	kg
7304.29.10.60	60	Having a wall thickness of 12.7 mm or more	kg
7304.29.10.80	80	Having an outside diameter exceeding 406.4 mm	kg
7304.29.20		Other		Free 1/ 1/		1% 1/
		Having an outside diameter less than 215.9 mm:
7304.29.20.10	10	Having a wall thickness less than 12.7 mm	kg
7304.29.20.20	20	Having a wall thickness of 12.7 mm or more	kg
		Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
7304.29.20.30	30	Having a wall thickness less than 12.7 mm	kg
7304.29.20.40	40	Having a wall thickness of 12.7 mm or more	kg
		Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
7304.29.20.50	50	Having a wall thickness less than 12.7 mm	kg
7304.29.20.60	60	Having a wall thickness of 12.7 mm or more	kg
7304.29.20.80	80	Having an outside diameter exceeding 406.4 mm	kg
		Of other alloy steel:
7304.29.31		Threaded or coupled		Free 1/ 1/		28% 1/
		Having an outside diameter less than 215.9 mm:
7304.29.31.10	10	Having a wall thickness less than 12.7 mm	kg
7304.29.31.20	20	Having a wall thickness of 12.7 mm or more	kg
		Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
7304.29.31.30	30	Having a wall thickness less than 12.7 mm	kg
7304.29.31.40	40	Having a wall thickness of 12.7 mm or more	kg
		Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
7304.29.31.50	50	Having a wall thickness less than 12.7 mm	kg
7304.29.31.60	60	Having a wall thickness of 12.7 mm or more	kg
7304.29.31.80	80	Having an outside diameter exceeding 406.4 mm	kg
7304.29.41		Other		Free 1/ 1/		8.5% 1/
		Having an outside diameter less than 215.9 mm:
7304.29.41.10	10	Having a wall thickness less than 12.7 mm	kg
7304.29.41.20	20	Having a wall thickness of 12.7 mm or more	kg
		Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
7304.29.41.30	30	Having a wall thickness less than 12.7 mm	kg
7304.29.41.40	40	Having a wall thickness of 12.7 mm or more	kg
		Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
7304.29.41.50	50	Having a wall thickness less than 12.7 mm	kg
7304.29.41.60	60	Having a wall thickness of 12.7 mm or more	kg
7304.29.41.80	80	Having an outside diameter exceeding 406.4 mm	kg
		Tubing:
7304.29.50		Of iron or nonalloy steel		Free 1/ 1/		25% 1/
		Having an outside diameter not exceeding 114.3 mm:
7304.29.50.15	15	Having a wall thickness not exceeding 9.5 mm	kg
7304.29.50.30	30	Having a wall thickness exceeding 9.5 mm	kg
7304.29.50.45	45	Having an outside diameter exceeding 114.3 mm but less than 215.9 mm	kg
7304.29.50.60	60	Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm	kg
7304.29.50.75	75	Having an outside diameter exceeding 406.4 mm	kg
7304.29.61		Of other alloy steel		Free 1/ 1/		35%
		Having an outside diameter not exceeding 114.3 mm:
7304.29.61.15	15	Having a wall thickness not exceeding 9.5 mm	kg
7304.29.61.30	30	Having a wall thickness exceeding 9.5 mm	kg
7304.29.61.45	45	Having an outside diameter exceeding 114.3 mm but less than 215.9 mm	kg
7304.29.61.60	60	Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm	kg
7304.29.61.75	75	Having an outside diameter exceeding 406.4 mm	kg
		Other, of circular cross section, of iron or nonalloy steel:
7304.31		Cold-drawn or cold-rolled (cold-reduced):
7304.31.30	00	Hollow bars	kg	Free 1/ 1/		22%
7304.31.60		Other		Free 1/ 1/		25% 1/
7304.31.60.10	10	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters	kg
7304.31.60.50	50	Other	kg
7304.39.00		Other		Free 1/ 1/		25% 1/
		Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters:
7304.39.00.02	02	Having an outside diameter less than 38.1 mm	kg
7304.39.00.04	04	Having an outside diameter of 38.1 mm or more but less than 190.5 mm	kg
7304.39.00.06	06	Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm	kg
7304.39.00.08	08	Having an outside diameter exceeding 285.8 mm	kg
		Other:
7304.39.00.16	16	Galvanized, having an outside diameter not exceeding 114.3 mm	kg
		Other:
7304.39.00.20	20	Having an outside diameter less than 38.1 mm	kg
		Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm:
7304.39.00.24	24	Having a wall thickness less than 6.4 mm	kg
7304.39.00.28	28	Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mm	kg
7304.39.00.32	32	Having a wall thickness exceeding 12.7 mm	kg
		Having an outside diameter exceeding 114.3 mm but less than 190.5 mm:
7304.39.00.36	36	Having a wall thickness less than 12.7 mm	kg
7304.39.00.40	40	Having a wall thickness of 12.7 mm or more but less than 19 mm	kg
7304.39.00.44	44	Having a wall thickness of 19 mm or more	kg
		Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm:
7304.39.00.48	48	Having a wall thickness less than 12.7 mm	kg
7304.39.00.52	52	Having a wall thickness of 12.7 mm or more but less than 19 mm	kg
7304.39.00.56	56	Having a wall thickness of 19 mm or more	kg
		Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
7304.39.00.62	62	Having a wall thickness less than 12.7 mm	kg
7304.39.00.68	68	Having a wall thickness of 12.7 mm or more but less than 19 mm	kg
7304.39.00.72	72	Having a wall thickness of 19 mm or more	kg
		Having an outside diameter exceeding 406.4 mm:
7304.39.00.76	76	Having a wall thickness less than 19 mm	kg
7304.39.00.80	80	Having a wall thickness of 19 mm or more	kg
		Other, of circular cross section, of stainless steel:
7304.41		Cold-drawn or cold-rolled (cold-reduced):
7304.41.30		Of an external diameter of less than 19 mm		Free 1/		36%
7304.41.30.05	05	Of high-nickel alloy steel	kg
		Other:
7304.41.30.15	15	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters	kg
7304.41.30.45	45	Other	kg
7304.41.60		Other		Free 1/		36%
7304.41.60.05	05	Of high-nickel alloy steel	kg
		Other:
7304.41.60.15	15	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters	kg
7304.41.60.45	45	Other	kg
7304.49.00		Other		Free 1/ 1/		36%
7304.49.00.05	05	Of high-nickel alloy steel	kg
		Other:
7304.49.00.15	15	Hollow bars	kg
		Other:
7304.49.00.45	45	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters	kg
7304.49.00.60	60	Other	kg
		Other, of circular cross section, of other alloy steel:
7304.51		Cold-drawn or cold-rolled (cold-reduced):
7304.51.10	00	Suitable for use in the manufacture of ball or roller bearings	kg	Free 1/ 1/		34%
7304.51.50		Other		Free 1/ 1/		35%
7304.51.50.05	05	Of high-nickel alloy steel	kg
		Other:
		Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters:
7304.51.50.15	15	Of heat-resisting steel	kg
7304.51.50.45	45	Other	kg
7304.51.50.60	60	Other	kg
7304.59		Other:
7304.59.10	00	Suitable for use in the manufacture of ball or roller bearings	kg	Free 1/ 1/		34%
		Other:
7304.59.20		Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters		Free 1/ 1/		35%
7304.59.20.30	30	Of heat-resisting steel	kg
		Other:
7304.59.20.40	40	Having an outside diameter less than 38.1 mm	kg
7304.59.20.45	45	Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm	kg
7304.59.20.55	55	Having an outside diameter exceeding 114.3 mm but less than 190.5 mm	kg
7304.59.20.60	60	Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm	kg
7304.59.20.70	70	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm	kg
7304.59.20.80	80	Having an outside diameter exceeding 406.4 mm	kg
		Other:
7304.59.60	00	Of heat-resisting steel	kg	Free 1/ 1/		36%
7304.59.80		Other		Free 1/ 1/		35%
7304.59.80.10	10	Having an outside diameter less than 38.1 mm	kg
		Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm:
7304.59.80.15	15	Having a wall thickness less than 6.4 mm	kg
7304.59.80.20	20	Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mm	kg
7304.59.80.25	25	Having a wall thickness exceeding 12.7 mm	kg
		Having an outside diameter exceeding 114.3 mm but less than 190.5 mm:
7304.59.80.30	30	Having a wall thickness less than 12.7 mm	kg
7304.59.80.35	35	Having a wall thickness of 12.7 mm or more but less than 19 mm	kg
7304.59.80.40	40	Having a wall thickness of 19 mm or more	kg
		Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm:
7304.59.80.45	45	Having a wall thickness less than 12.7 mm	kg
7304.59.80.50	50	Having a wall thickness of 12.7 mm or more but less than 19 mm	kg
7304.59.80.55	55	Having a wall thickness of 19 mm or more	kg
		Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
7304.59.80.60	60	Having a wall thickness less than 12.7 mm	kg
7304.59.80.65	65	Having a wall thickness of 12.7 mm or more but less than 19 mm	kg
7304.59.80.70	70	Having a wall thickness of 19 mm or more	kg
7304.59.80.80	80	Having an outside diameter exceeding 406.4 mm	kg
7304.90		Other:
		Having a wall thickness of 4 mm or more:
7304.90.10	00	Of iron or nonalloy steel	kg	Free 1/ 1/		1%
7304.90.30	00	Of alloy steel	kg	Free 1/		8.5%
		Having a wall thickness of less than 4 mm:
7304.90.50	00	Of iron or nonalloy steel	kg	Free 1/		25%
7304.90.70	00	Of alloy steel	kg	Free 1/ 1/		35%
7305		Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sections, the external diameter of which exceeds 406.4 mm, of iron or steel:
		Line pipe of a kind used for oil or gas pipelines:
7305.11		Longitudinally submerged arc welded:
7305.11.10		Of iron or nonalloy steel		Free 1/ 1/		5.5% 1/
7305.11.10.30	30	With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm	kg
7305.11.10.60	60	With an external diameter exceeding 609.6 mm	kg
7305.11.50	00	Of alloy steel	kg	Free 1/ 1/		10%
7305.12		Other, longitudinally welded:
7305.12.10		Of iron or nonalloy steel		Free 1/ 1/		5.5% 1/
7305.12.10.30	30	With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm	kg
7305.12.10.60	60	With an external diameter exceeding 609.6 mm	kg
7305.12.50	00	Of alloy steel	kg	Free 1/ 1/		10%
7305.19		Other:
7305.19.10		Of iron or nonalloy steel		Free 1/ 1/		5.5%
7305.19.10.30	30	With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm	kg
7305.19.10.60	60	With an external diameter exceeding 609.6 mm	kg
7305.19.50	00	Of alloy steel	kg	Free 1/ 1/		10%
7305.20		Casing of a kind used in drilling for oil or gas:
		Of iron or nonalloy steel:
7305.20.20	00	Threaded or coupled	kg	Free 1/ 1/		20%
7305.20.40	00	Other	kg	Free 1/ 1/		1%
		Of alloy steel:
7305.20.60	00	Threaded or coupled	kg	Free 1/ 1/		28%
7305.20.80	00	Other	kg	Free 1/ 1/		8.5%
		Other, welded:
7305.31		Longitudinally welded:
7305.31.20	00	Tapered pipes and tubes of steel principally used as parts of illuminating articles	kg	Free 1/ 1/		45%
		Other:
7305.31.40	00	Of iron or nonalloy steel	kg	Free 1/ 1/		5.5%
7305.31.60		Of alloy steel		Free 1/ 1/		10%
7305.31.60.10	10	Of stainless steel	kg
7305.31.60.90	90	Other	kg
7305.39		Other:
7305.39.10	00	Of iron or nonalloy steel	kg	Free 1/ 1/		5.5%
7305.39.50	00	Of alloy steel	kg	Free 1/ 1/		10%
7305.90		Other:
7305.90.10	00	Of iron or nonalloy steel	kg	Free 1/ 1/		5.5%
7305.90.50	00	Of alloy steel	kg	Free 1/ 1/		10%
7306		Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel:
		Line pipe of a kind used for oil or gas pipelines:
7306.11.00		Welded, of stainless steel		Free 1/ 1/		10%
7306.11.00.10	10	With an outside diameter not exceeding 114.3 mm	kg
7306.11.00.50	50	With an outside diameter exceeding 114.3 mm	kg
7306.19		Other:
7306.19.10		Of iron or nonalloy steel		Free 1/ 1/		5.5%
7306.19.10.10	10	With an outside diameter not exceeding 114.3 mm	kg
7306.19.10.50	50	With an outside diameter exceeding 114.3 mm	kg
7306.19.51		Of alloy steel		Free 1/ 1/		10%
7306.19.51.10	10	With an outside diameter not exceeding 114.3 mm	kg
7306.19.51.50	50	With an outside diameter exceeding 114.3 mm	kg
		Casing and tubing of a kind used in drilling for oil or gas:
7306.21		Welded of stainless steel:
		Casing:
7306.21.30	00	Threaded or coupled	kg	Free 1/ 1/		28%
7306.21.40	00	Other	kg	Free 1/ 1/		8.5%
7306.21.80		Tubing		Free 1/ 1/		10%
7306.21.80.10	10	Imported with coupling	kg
7306.21.80.50	50	Other	kg
7306.29		Other:
		Casing:
		Of iron or nonalloy steel:
7306.29.10		Threaded or coupled		Free 1/ 1/		20%
7306.29.10.30	30	Imported with coupling	kg
7306.29.10.90	90	Other	kg
7306.29.20	00	Other	kg	Free 1/ 1/		1% 1/
		Other:
7306.29.31	00	Threaded or coupled	kg	Free 1/ 1/ 1/		28%
7306.29.41	00	Other	kg	Free 1/ 1/ 1/		8.5%
		Tubing:
7306.29.60		Of iron or nonalloy steel		Free 1/ 1/ 1/		5.5% 1/
7306.29.60.10	10	Imported with coupling	kg
7306.29.60.50	50	Other	kg
7306.29.81		Other		Free 1/ 1/		10%
7306.29.81.10	10	Imported with coupling	kg
7306.29.81.50	50	Other	kg
7306.30		Other, welded, of circular cross section, of iron or nonalloy steel:
7306.30.10	00	Having a wall thickness of less than 1.65 mm	kg	Free 1/ 1/		25%
		Having a wall thickness of 1.65 mm or more:
7306.30.30	00	Tapered steel pipes and tubes principally used as parts of illuminating articles	kg	Free 1/ 1/		45%
7306.30.50		Other		Free 1/ 1/		5.5% 1/
7306.30.50.10	10	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold drawn	kg
7306.30.50.15	15	Other, cold-drawn	kg
7306.30.50.20	20	Other, cold-rolled (cold-reduced) with a wall thickness not exceeding 2.54 mm	kg
		Other:
		With an outside diameter not exceeding 114.3 mm:
		Galvanized:
		Imported with coupling:
7306.30.50.26	26	With an outside diameter not exceeding 50.8 mm	kg
7306.30.50.27	27	With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm	kg
7306.30.50.28	28	Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit	kg
		Other:
7306.30.50.31	31	With an outside diameter not exceeding 50.8 mm	kg
7306.30.50.33	33	With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm	kg
		Other:
7306.30.50.35	35	Tube and pipe hollows for redrawing	kg
		Imported with coupling:
7306.30.50.41	41	With an outside diameter not exceeding 50.8 mm	kg
7306.30.50.43	43	With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm	kg
		Other:
7306.30.50.56	56	With an outside diameter not exceeding 50.8 mm	kg
7306.30.50.57	57	With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm	kg
		With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm:
7306.30.50.85	85	Galvanized	kg
7306.30.50.90	90	Other	kg
7306.40		Other, welded, of circular cross section, of stainless steel:
7306.40.10		Having a wall thickness of less than 1.65 mm		Free 1/ 1/		36%
		Containing more than 0.5 percent by weight of nickel:
7306.40.10.10	10	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	kg
7306.40.10.15	15	Other	kg
7306.40.10.90	90	Other	kg
7306.40.50		Having a wall thickness of 1.65 mm or more		Free 1/ 1/		11%
7306.40.50.05	05	Of high-nickel alloy steel	kg
		Other:
7306.40.50.15	15	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn	kg
		Other, cold-drawn or cold-rolled (cold- reduced):
7306.40.50.40	40	Containing more than 0.5 percent but less than 24 percent by weight of nickel	kg
		Other:
7306.40.50.42	42	Containing less than 15 percent by weight of chromium	kg
7306.40.50.44	44	Other	kg
		Other:
		With an outside diameter not exceeding 114.3 mm:
		Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7306.40.50.62	62	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	kg
7306.40.50.64	64	Other	kg
7306.40.50.80	80	Other	kg
		With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm:
7306.40.50.85	85	Containing more than 0.5 percent but less than 24 percent by weight of nickel	kg
7306.40.50.90	90	Other	kg
7306.50		Other, welded, of circular cross section, of other alloy steel:
7306.50.10	00	Having a wall thickness of less than 1.65 mm	kg	Free 1/ 1/		35%
		Having a wall thickness of 1.65 mm or more:
7306.50.30	00	Tapered pipes and tubes of steel principally used as parts of illuminating articles	kg	Free 1/ 1/		45%
7306.50.50		Other		Free 1/ 1/		10%
7306.50.50.10	10	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn	kg
7306.50.50.30	30	Other, cold-drawn or cold-rolled (cold- reduced)	kg
		Other:
7306.50.50.50	50	With an outside diameter not exceeding 114.3 mm	kg
7306.50.50.70	70	With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm	kg
		Other, welded, of noncircular cross section:
7306.61		Of square or rectangular cross section:
		Having a wall thickness of 4 mm or more:
7306.61.10	00	Of iron or nonalloy steel	kg	Free 1/ 1/		1%
7306.61.30	00	Of alloy steel	kg	Free 1/ 1/		28%
		Having a wall thickness of less than 4 mm:
7306.61.50	00	Of iron or nonalloy steel	kg	Free 1/ 1/		25%
7306.61.70		Of alloy steel		Free 1/ 1/		35%
7306.61.70.30	30	Of stainless steel	kg
7306.61.70.60	60	Other	kg
7306.69		Of other noncircular cross section:
		Having a wall thickness of 4 mm or more:
7306.69.10	00	Of iron or nonalloy steel	kg	Free 1/ 1/		1%
7306.69.30	00	Of alloy steel	kg	Free 1/ 1/		28%
		Having a wall thickness of less than 4 mm:
7306.69.50	00	Of iron or nonalloy steel	kg	Free 1/		25%
7306.69.70		Of alloy steel		Free 1/ 1/		35%
7306.69.70.30	30	Of stainless steel	kg
7306.69.70.60	60	Other	kg
7306.90		Other:
7306.90.10	00	Of iron or nonalloy steel	kg	Free 1/ 1/		5.5%
7306.90.50	00	Of alloy steel	kg	Free 1/ 1/		10%
7307		Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel:
		Cast fittings:
7307.11.00		Of nonmalleable cast iron		4.8% 1/	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	25%
7307.11.00.30	30	For threaded pipe	kg
		Other:
7307.11.00.45	45	For cast-iron soil pipe	kg
7307.11.00.60	60	Other	kg
7307.19		Other:
7307.19.30		Ductile fittings		5.6% 1/	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
7307.19.30.40	40	Grooved-end fittings (including grooved couplings)	kg
		Other:
7307.19.30.60	60	Threaded	kg
7307.19.30.70	70	With mechanical, push-on (rubber compression) or flanged joints attached	kg
7307.19.30.85	85	Other	kg
7307.19.90		Other		6.2% 1/	Free (A+, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
7307.19.90.30	30	Unions	kg
		Other:
7307.19.90.40	40	Grooved-end fittings (including grooved couplings)	kg
		Other:
7307.19.90.60	60	Threaded	kg
7307.19.90.80	80	Other	kg
		Other, of stainless steel:
7307.21		Flanges:
7307.21.10	00	Not machined, not tooled and not otherwise processed after forging	kg	3.3% 1/ 1/	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	34%
7307.21.50	00	Other	kg	5.6% 1/ 1/	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
7307.22		Threaded elbows, bends and sleeves:
7307.22.10	00	Sleeves (couplings)	kg	Free 1/ 1/		45%
7307.22.50	00	Other	kg	6.2% 1/ 1/	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
7307.23.00		Butt welding fittings		5% 1/ 1/	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
7307.23.00.30	30	Not machined, not tooled and not otherwise processed after forming	kg
7307.23.00.90	90	Other	kg
7307.29.00		Other		5% 1/ 1/	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
7307.29.00.30	30	Nipples	kg
7307.29.00.90	90	Other	kg
		Other:
7307.91		Flanges:
		Not machined, not tooled and not otherwise processed after forging:
7307.91.10	00	Of iron or nonalloy steel	kg	3.3% 1/ 1/	Free (A, AU, BH, CL, CO, D, E, IL, JO, JP, KR, MA, OM, P, PA, PE, S, SG)	25%
7307.91.30	00	Of alloy steel (except stainless steel)	kg	3.2% 1/ 1/	Free (A*, AU, BH, CL, CO, D, E, IL, JO, JP, KR, MA, OM, P, PA, PE, S, SG)	33%
7307.91.50		Other		5.5% 1/ 1/	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG) 2.75% (JP)	45%
		With an inside diameter of less than 360 mm:
7307.91.50.10	10	Of iron or nonalloy steel	kg
7307.91.50.30	30	Of alloy steel (except stainless steel)	kg
		With an inside diameter of 360 mm or more:
7307.91.50.50	50	Of iron or nonalloy steel	kg
7307.91.50.70	70	Of alloy steel (except stainless steel)	kg
7307.92		Threaded elbows, bends and sleeves:
7307.92.30		Sleeves (couplings)		Free 1/ 1/		45%
7307.92.30.10	10	Of iron or nonalloy steel	kg
7307.92.30.30	30	Of alloy steel (except stainless steel)	kg
7307.92.90	00	Other	kg	6.2% 1/ 1/	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG) 3.1% (JP)	45%
7307.93		Butt welding fittings:
		With an inside diameter of less than 360 mm:
7307.93.30		Of iron or nonalloy steel		6.2% 1/ 1/	Free (A+, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
7307.93.30.10	10	Not machined, not tooled and not otherwise processed after forging	kg
7307.93.30.40	40	Other	kg
7307.93.60	00	Of alloy steel (except stainless steel)	kg	5.5% 1/ 1/	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
7307.93.90		With an inside diameter of 360 mm or more		4.3% 1/ 1/	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
		Of iron or nonalloy steel:
7307.93.90.10	10	Not machined, not tooled and not otherwise processed after forging	kg
7307.93.90.40	40	Other	kg
7307.93.90.60	60	Of alloy steel (except stainless steel)	kg
7307.99		Other:
		Not machined, not tooled and not otherwise processed after forging:
7307.99.10	00	Of iron or nonalloy steel	kg	3.7% 1/ 1/	Free (A, AU, BH, CL, CO, D, E, IL, JO, JP, KR, MA, OM, P, PA, PE, S, SG)	25% 1/
7307.99.30	00	Of alloy steel (except stainless steel)	kg	3.2% 1/ 1/	Free (A, AU, BH, CL, CO, D, E, IL, JO, JP, KR, MA, OM, P, PA, PE, S, SG)	33%
7307.99.50		Other		4.3% 1/ 1/	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, JP, KR, MA, OM, P, PA, PE, S, SG)	45%
		Of iron or nonalloy steel:
7307.99.50.15	15	Nipples	kg
7307.99.50.45	45	Other	kg
7307.99.50.60	60	Of alloy steel (except stainless steel)	kg
7308		Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge sections, lock gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns) of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel:
7308.10.00	00	Bridges and bridge sections	kg	Free 1/ 1/		45%
7308.20.00		Towers and lattice masts		Free 1/ 1/		45%
7308.20.00.20	20	Tubular, whether or not tapered, and sectional components thereof	kg
7308.20.00.90	90	Other	kg
7308.30		Doors, windows and their frames and thresholds for doors:
7308.30.10	00	Of stainless steel	kg	Free 1/ 1/		35%
7308.30.50		Other		Free 1/ 1/		25%
7308.30.50.15	15	Windows and their frames	kg
7308.30.50.25	25	Thresholds for doors	kg
7308.30.50.50	50	Other	kg
7308.40.00	00	Equipment for scaffolding, shuttering, propping or pit- propping	kg	Free 1/ 1/		45%
7308.90		Other:
		Columns, pillars, posts, beams, girders and similar structural units:
7308.90.30	00	Not in part of alloy steel	kg	Free 1/ 1/		20% 1/
7308.90.60	00	Other	kg	Free 1/ 1/		30% 1/
		Other:
7308.90.70	00	Steel grating	kg	Free 1/ 1/		45%
7308.90.95		Other		Free 1/ 1/		45%
7308.90.95.30	30	Sheet-metal roofing, siding, flooring and roof drainage equipment	kg
		Other:
7308.90.95.60	60	Architectural and ornamental work	kg
7308.90.95.90	90	Other	kg
7309.00.00		Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment		Free 1/ 1/		45%
7309.00.00.30	30	Tanks	No. kg
7309.00.00.90	90	Other	No. kg
7310		Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment:
7310.10.00		Of a capacity of 50 liters or more		Free 1/ 1/		25% 1/
7310.10.00.05	05	Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter.	No.
7310.10.00.15	15	Empty steel drums and barrels	No. kg
7310.10.00.90	90	Other	kg
		Of a capacity of less than 50 liters:
7310.21.00		Cans which are to be closed by soldering or crimping		Free 1/ 1/		25%
7310.21.00.25	25	Containers, of circular cross section, of a volume capacity between 11.4 liters and 26.6 liters, of a kind used for the conveyance of goods	No.
7310.21.00.50	50	Other	No.
7310.29.00		Other		Free 1/ 1/		25% 1/
		Containers, of circular cross section, of a volume capacity between 11.4 liters and 26.6 liters, of a kind used for the conveyance of goods:
7310.29.00.20	20	Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter	No.
7310.29.00.30	30	Other	No.
		Other:
7310.29.00.55	55	Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter	No.
7310.29.00.65	65	Other	No.
7311.00.00		Containers for compressed or liquefied gas, of iron or steel		Free 1/ 1/		25% 1/
		Certified prior to exportation to have been made in accordance with the safety requirements of sections 178.36 through 178.68 of title 49 CFR or under a specific exemption to those requirements:
7311.00.00.30	30	Seamless steel containers not overwrapped, marked DOT 3A, 3AX, 3AA, 3AAX, 3B, 3E, 3HT, 3T or DOT-E followed by a specific exemption number	No. kg
7311.00.00.60	60	Other	No. kg
7311.00.00.90	90	Other	No. kg
7312		Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated:
7312.10		Stranded wire, ropes and cables:
		Stranded wire:
		Of stainless steel:
7312.10.05	00	Fitted with fittings or made up into articles	kg	Free 1/ 1/		45%
7312.10.10		Other		Free 1/ 1/		45%
7312.10.10.30	30	Tire cord	kg
7312.10.10.50	50	Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5	kg
7312.10.10.70	70	Other	kg
		Other:
7312.10.20	00	Fitted with fittings or made up into articles	kg	Free 1/ 1/		45%
7312.10.30		Other		Free 1/ 1/		35%
7312.10.30.05	05	Tire cord	kg
		For prestressing concrete:
7312.10.30.10	10	Covered with textile or other non- metallic material	kg
7312.10.30.12	12	Other	kg
7312.10.30.20	20	Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5	kg
		Other:
7312.10.30.45	45	Of brass plated wire	kg
		Other:
		Galvanized:
7312.10.30.65	65	ACSR core strand	kg
		Other:
7312.10.30.70	70	Covered with textile or other nonmetallic material	kg
7312.10.30.74	74	Other	kg
7312.10.30.80	80	Other	kg
		Ropes, cables and cordage other than stranded wire:
		Of stainless steel:
7312.10.50	00	Fitted with fittings or made up into articles	kg	Free 1/ 1/		45%
7312.10.60		Other		Free 1/ 1/		45%
7312.10.60.30	30	With a diameter not exceeding 9.5 mm	kg
7312.10.60.60	60	Other	kg
		Other:
7312.10.70	00	Fitted with fittings or made up into articles	kg	Free 1/ 1/		45%
		Other:
7312.10.80	00	Of brass plated wire	kg	Free 1/ 1/		35%
7312.10.90		Other		Free 1/ 1/		35%
		Galvanized:
7312.10.90.30	30	With a diameter not exceeding 9.5 mm	kg
7312.10.90.60	60	With a diameter exceeding 9.5 mm	kg
7312.10.90.90	90	Other	kg
7312.90.00	00	Other	kg	Free 1/ 1/		45%
7313.00.00	00	Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel	kg	Free 1/ 1/		Free
7314		Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel:
		Woven cloth:
7314.12		Endless bands for machinery, of stainless steel:
7314.12.10	00	With meshes not finer than 12 wires to the lineal centimeter in warp or filling	m² kg	Free 1/ 1/		35%
7314.12.20	00	With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or filling	m² kg	Free 1/ 1/		50%
		With meshes finer than 36 wires to the lineal centimeter in warp or filling:
		Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines:
7314.12.30	00	With 94 or more wires to the lineal centimeter	m² kg	Free 1/ 1/		75%
7314.12.60	00	Other	m² kg	Free 1/ 1/		75%
7314.12.90	00	Other	m² kg	Free 1/ 1/		60%
7314.14		Other woven cloth, of stainless steel:
7314.14.10	00	With meshes not finer than 12 wires to the lineal centimeter in warp or filling	m² kg	Free 1/ 1/		35%
7314.14.20	00	With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or filling	m² kg	Free 1/ 1/		50%
		With meshes finer than 36 wires to the lineal centimeter in warp or maximum:
		Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines:
7314.14.30	00	With 94 or more wires to the lineal centimeter	m² kg	Free 1/ 1/		75%
7314.14.60	00	Other	m² kg	Free 1/ 1/		75%
7314.14.90	00	Other	m² kg	Free 1/ 1/		60%
7314.19.01	00	Other	m² kg	Free 1/ 1/		60%
7314.20.00	00	Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm² or more	kg	Free 1/ 1/		45%
		Other grill, netting and fencing, welded at the intersection:
7314.31		Plated or coated with zinc:
7314.31.10	00	Wire fencing plated or coated with zinc, whether or not covered with plastic material	kg	Free 1/ 1/		1.1¢/kg
7314.31.50		Other:		Free 1/ 1/		45%
7314.31.50.10	10	Welded wire stucco netting, furred, not reinforced with supplemental horizontal wire	kg
7314.31.50.80	80	Other	kg
7314.39.00	00	Other	kg	Free 1/ 1/		45%
		Other grill, netting and fencing:
7314.41.00		Plated or coated with zinc		Free 1/ 1/		1.1¢/kg 1/
7314.41.00.30	30	Chain link fencing	kg
		Woven wire stucco netting, furred, not reinforced with supplemental horizontal wire:
7314.41.00.40	40	Of wire with maximum cross- sectional dimension of 1 mm	kg
7314.41.00.45	45	Other	kg
7314.41.00.80	80	Other	kg
7314.42.00		Coated with plastics		Free 1/ 1/		1.1¢/kg
7314.42.00.30	30	Chain link fencing	kg
7314.42.00.60	60	Other	kg
7314.49		Other:
7314.49.30	00	Not cut to shape	kg	Free 1/ 1/		45%
7314.49.60	00	Cut to shape	kg	Free 1/ 1/		35%
7314.50.00	00	Expanded metal	m² kg	Free 1/ 1/		45%
7315		Chain and parts thereof, of iron or steel:
		Articulated link chain and parts thereof:
7315.11.00		Roller chain		Free 1/ 1/		40%
7315.11.00.05	05	For motor vehicles	kg
		Other:
		Of not over 50 mm pitch and containing more than 3 parts per pitch:
7315.11.00.10	10	Bicycle chains	kg
7315.11.00.45	45	Other	kg
7315.11.00.60	60	Other	kg
7315.12.00		Other chain		Free 1/ 1/		40%
7315.12.00.20	20	Of not over 50 mm pitch and containing more than 3 parts per pitch	kg
		Other:
7315.12.00.40	40	Welded steel chain	kg
7315.12.00.60	60	Cast and combination chain	kg
7315.12.00.80	80	Other	kg
7315.19.00	00	Parts	kg	Free 1/ 1/		40%
7315.20		Skid chain:
7315.20.10	00	Not over 8 mm in diameter	kg	Free 1/ 1/		10%
7315.20.50	00	Over 8 mm in diameter	kg	Free 1/ 1/		2.5¢/kg
		Other chain:
7315.81.00	00	Stud link	kg	Free 1/ 1/		4.4¢/kg
7315.82		Other, welded link:
		Of alloy steel:
7315.82.10	00	Not over 10 mm in diameter	kg	Free 1/ 1/		10%
7315.82.30	00	Over 10 mm in diameter	kg	Free 1/ 1/		10%
		Of iron or nonalloy steel:
7315.82.50	00	Not over 10 mm in diameter	kg	Free 1/ 1/		10%
7315.82.70	00	Over 10 mm in diameter	kg	Free 1/ 1/		10%
7315.89		Other:
		With links of essentially round cross sections:
7315.89.10	00	Not over 8 mm in diameter	kg	1.5% 1/ 1/	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	10%
7315.89.30	00	Over 8 mm in diameter	kg	Free 1/ 1/		4.7¢/kg
7315.89.50	00	Other	kg	3.9% 1/ 1/	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
7315.90.00	00	Other parts	kg	2.9% 1/ 1/	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
7316.00.00	00	Anchors, grapnels and parts thereof, of iron or steel	No. kg	Free 1/ 1/		25%
7317.00		Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper:
7317.00.10	00	Thumb tacks	kg	Free 1/ 1/		4%
		Other, suitable for use in powder-actuated handtools:
7317.00.20	00	Not threaded	kg	Free 1/ 1/		1.5¢/kg
7317.00.30	00	Threaded	kg	Free 1/ 1/		45%
		Other:
		Of one piece construction:
7317.00.55		Made of round wire		Free 1/ 1/		3.5%
		Collated nails:
7317.00.55.01	01	Collated roofing nails with a length of 20.6 mm to 46.1 mm, a head diameter of 8.3 mm to 10.6 mm, a shank diameter of 2.5 mm to 3.2 mm, whether or not galvanized	kg
		Other:
		Assembled in a wire coil:
7317.00.55.02	02	Galvanized	kg
7317.00.55.03	03	Other	kg
		Assembled in a plastic strip:
7317.00.55.05	05	Galvanized	kg
7317.00.55.07	07	Other	kg
7317.00.55.08	08	Assembled in a paper strip	kg
7317.00.55.11	11	Assembled in a wire strip	kg
7317.00.55.18	18	Other	kg
		Other:
7317.00.55.19	19	With a length of less than 25.4 mm and with a diameter of less than 1.65 mm	kg
		Other:
		Smooth shank:
7317.00.55.20	20	Not coated, plated or painted	kg
		Coated, plated or painted:
7317.00.55.30	30	Galvanized	kg
7317.00.55.40	40	Vinyl, resin or cement coated	kg
7317.00.55.50	50	Other	kg
		Other:
7317.00.55.60	60	Not coated, plated or painted	kg
		Coated, plated or painted:
7317.00.55.70	70	Galvanized	kg
7317.00.55.80	80	Vinyl, resin or cement coated	kg
7317.00.55.90	90	Other	kg
7317.00.65		Other		Free 1/		5.5%
7317.00.65.30	30	Cut	kg
7317.00.65.60	60	Other	kg
7317.00.75	00	Of two or more pieces	kg	Free 1/ 1/		8%
7318		Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel:
		Threaded articles:
7318.11.00	00	Coach screws	kg	12.5% 1/ 1/	Free (A+, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	25%
7318.12.00	00	Other wood screws	kg	12.5% 1/ 1/	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	25%
7318.13.00		Screw hooks and screw rings		5.7% 1/ 1/	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
7318.13.00.30	30	Having shanks or threads with a diameter of less than 6 mm	kg
7318.13.00.60	60	Having shanks or threads with a diameter of 6 mm or more	kg
7318.14		Self-tapping screws:
7318.14.10		Having shanks or threads with a diameter of less than 6 mm		6.2% 1/ 1/	Free (A+, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG) 3.1% (JP)	45%
7318.14.10.30	30	Of stainless steel	kg
7318.14.10.60	60	Other	kg
7318.14.50		Having shanks or threads with a diameter of 6 mm or more		8.6% 1/ 1/	Free (A+, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG) 4.3% (JP)	45%
7318.14.50.20	20	Of stainless steel	kg
7318.14.50.80	80	Other	kg
7318.15		Other screws and bolts, whether or not with their nuts or washers:
7318.15.20		Bolts and bolts and their nuts or washers entered or exported in the same shipment		Free 1/ 1/		3.5% 1/
7318.15.20.10	10	Having shanks or threads with a diameter of less than 6 mm	kg
		Having shanks or threads with a diameter of 6 mm or more:
7318.15.20.20	20	Track bolts	kg
7318.15.20.30	30	Structural bolts	kg
		Bent bolts:
7318.15.20.41	41	Right-angle anchor bolts	kg
7318.15.20.46	46	Other	kg
		Other:
		With round heads:
7318.15.20.51	51	Of stainless steel	kg
7318.15.20.55	55	Other	kg
		With hexagonal heads:
7318.15.20.61	61	Of stainless steel	kg
7318.15.20.65	65	Other	kg
		Other:
7318.15.20.91	91	Of stainless steel	kg
7318.15.20.95	95	Other	kg
7318.15.40	00	Machine screws 9.5 mm or more in length and 3.2 mm or more in diameter (not including cap screws)	kg	Free 1/ 1/		2.2¢/kg 1/
7318.15.50		Studs		Free 1/ 1/		45%
7318.15.50.30	30	Of stainless steel	kg
		Other:
		Continuously threaded rod:
7318.15.50.51	51	Of alloy steel	kg
7318.15.50.56	56	Other	kg
7318.15.50.90	90	Other	kg
		Other:
7318.15.60		Having shanks or threads with a diameter of less than 6 mm		6.2% 1/ 1/	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
		Socket screws:
7318.15.60.10	10	Of stainless steel	kg
7318.15.60.40	40	Other	kg
		Other:
7318.15.60.70	70	Of stainless steel	kg
7318.15.60.80	80	Other	kg
7318.15.80		Having shanks or threads with a diameter of 6 mm or more		8.5% 1/ 1/	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
7318.15.80.20	20	Set screws	kg
		Other:
		Socket screws:
7318.15.80.30	30	Of stainless steel	kg
7318.15.80.45	45	Other	kg
		Other:
		With hexagonal heads:
7318.15.80.55	55	Of stainless steel	kg
		Other:
7318.15.80.66	66	Cap screws	kg
7318.15.80.69	69	Other	kg
		Other:
7318.15.80.82	82	Of stainless steel	kg
7318.15.80.85	85	Other	kg
7318.16.00		Nuts		Free 1/ 1/		0.5% 1/
		Lugnuts:
7318.16.00.15	15	Non-locking chrome-plated	kg
7318.16.00.30	30	Locking	kg
7318.16.00.45	45	Other	kg
		Other:
7318.16.00.60	60	Of stainless steel	kg
7318.16.00.85	85	Other	kg
7318.19.00	00	Other	kg	5.7% 1/ 1/	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG) 2.85% (JP)	45%
		Non-threaded articles:
7318.21.00		Spring washers and other lock washers		5.8% 1/ 1/	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG) 2.9% (JP)	35%
7318.21.00.30	30	Helical spring lock washers	kg
7318.21.00.90	90	Other	kg
7318.22.00	00	Other washers	kg	Free 1/ 1/		1.3¢/kg 1/
7318.23.00	00	Rivets	kg	Free 1/ 1/		2.2¢/kg
7318.24.00	00	Cotters and cotter pins	kg	3.8% 1/ 1/	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, JP, KR, MA, OM, P, PA, PE, S, SG)	45%
7318.29.00	00	Other	kg	2.8% 1/ 1/	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, JP, KR, MA, OM, P, PA, PE, S, SG)	45%
7319		Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included:
7319.40		Safety pins and other pins:
7319.40.20		Safety pins		4.5% 1/ 1/	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	35%
7319.40.20.10	10	On cards	gross
7319.40.20.50	50	Other	gross
7319.40.30	00	Dressmakers' or common pins	kg	4.1% 1/ 1/	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	35%
7319.40.50		Other		Free 1/ 1/		35%
7319.40.50.10	10	Push pins	kg
7319.40.50.50	50	Other	kg
7319.90		Other:
7319.90.10	00	Sewing, darning or embroidery needles	thousands	Free 1/ 1/		Free
7319.90.90	00	Other	No.	2.9% 1/ 1/	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
7320		Springs and leaves for springs, of iron or steel:
7320.10		Leaf springs and leaves therefor:
		Suitable for motor vehicle suspension:
7320.10.30	00	To be used in motor vehicles having a G.V.W. not exceeding 4 metric tons	kg	3.2% 1/ 1/	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	25%
7320.10.60		Other		3.2% 1/ 1/	Free (A+, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	25%
7320.10.60.15	15	Leaf springs having individual leaves with a thickness of 1.6 mm or more and leaves therefor	kg
7320.10.60.60	60	Other	kg
7320.10.90		Other		3.2% 1/ 1/	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, JP, KR, MA, OM, P, PA, PE, S, SG)	25%
7320.10.90.15	15	Leaf springs having individual leaves with a thickness of 1.6 mm or more and leaves therefor	kg
7320.10.90.60	60	Other	kg
7320.20		Helical springs:
7320.20.10	00	Suitable for motor-vehicle suspension	kg	3.2% 1/ 1/	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	25%
7320.20.50		Other		3.9% 1/ 1/	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
		Helical springs, of wire having a cross-sectional dimension of less than 5.1 mm:
7320.20.50.10	10	Suitable for use in mattress supports and mattresses of heading 9404	kg
7320.20.50.20	20	Other	kg
7320.20.50.45	45	Helical springs, of wire having a cross-sectional dimension of 5.1 mm or more but less than 12.7 mm	kg
7320.20.50.60	60	Other	kg
7320.90		Other:
7320.90.10	00	Hairsprings	kg	Free 1/ 1/		65%
7320.90.50		Other		2.9% 1/ 1/	Free (A*, AU, B, BH, CL, CO, D, E, IL, JO, JP, KR, MA, OM, P, PA, PE, S, SG)	45%
		Of wire:
7320.90.50.10	10	Suitable for use in mattress supports and mattresses of heading 9404	kg
7320.90.50.20	20	Other	kg
7320.90.50.60	60	Other	kg
7321		Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas rings, plate warmers and similar nonelectric domestic appliances, and parts thereof, of iron or steel:
		Cooking appliances and plate warmers:
7321.11		For gas fuel or for both gas and other fuels:
7321.11.10		Portable		5.7% 1/ 1/	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
7321.11.10.30	30	Stoves or ranges	No.
7321.11.10.60	60	Other	No.
		Other:
7321.11.30		Stoves or ranges:		Free 1/ 1/		45%
7321.11.30.10	10	Of a maximum width not exceeding 70 centimeters	No.
7321.11.30.20	20	Of a maximum width exceeding 70 but not exceeding 80 centimeters	No.
7321.11.30.50	50	Of a maximum width exceeding 80 centimeters	No.
7321.11.60	00	Other	No.	Free 1/ 1/		45%
7321.12.00	00	For liquid fuel	No.	Free 1/		45%
7321.19.00		Other, including appliances for solid fuel		Free 1/		45%
		Portable:
7321.19.00.20	20	Hibachis	No.
7321.19.00.40	40	Other	No.
		Other:
7321.19.00.60	60	Of cast iron	No.
7321.19.00.80	80	Other	No.
		Other appliances:
7321.81		For gas fuel or for both gas and other fuels:
7321.81.10	00	Portable	No.	2.9% 1/	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
7321.81.50	00	Other	No.	Free 1/ 1/		45%
7321.82		For liquid fuel:
7321.82.10	00	Portable	No.	2.9% 1/ 1/	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
7321.82.50	00	Other	No.	Free 1/ 1/		45%
7321.89.00		Other, including appliances for solid fuel		Free 1/ 1/		45%
7321.89.00.10	10	Fireplace grates of cast iron	No.
7321.89.00.50	50	Other	No.
7321.90		Parts:
		Of articles in subheading 7321.11.30:
7321.90.10	00	Cooking chambers, whether or not assembled	No. kg	Free 1/ 1/		45%
7321.90.20	00	Top surface panels with or without burners or controls	No. kg	Free 1/ 1/		45%
7321.90.40	00	Door assemblies, incorporating more than one of the following: inner panel, outer panel, window, insulation	No. kg	Free 1/ 1/		45%
7321.90.50	00	Other	No. kg	Free 1/ 1/		45%
7321.90.60		Other		Free 1/ 1/		45%
		Of cooking appliances and plate warmers:
7321.90.60.40	40	Shelving and racks for cooking ovens	No. kg
7321.90.60.60	60	Other	No. kg
7321.90.60.90	90	Other	No. kg
7322		Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel:
		Radiators and parts thereof:
7322.11.00	00	Of cast iron	No.	Free 1/		45%
7322.19.00	00	Other	No.	Free 1/ 1/		45%
7322.90.00		Other, including parts		Free 1/ 1/		45%
7322.90.00.15	15	Air heaters, not electrically heated, incorporating a motor-driven fan or blower	No. kg
7322.90.00.30	30	Hot air distributors, not electrically heated, incorporating a motor-driven fan or blower	No. kg
7322.90.00.45	45	Parts of air heaters and hot air distributors	No.
7323		Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel:
7323.10.00	00	Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like	kg	Free 1/ 1/		22¢/kg + 30%
		Other:
7323.91		Of cast iron, not enameled:
7323.91.10	00	Coated or plated with precious metal	No. kg	Free 1/		20%
7323.91.50		Other		5.3%	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	40%
7323.91.50.20	20	Bakeware (cookware not suitable for stove top use)	No. kg
7323.91.50.40	40	Other	No. kg
7323.92.00		Of cast iron, enameled		Free 1/		35.5%
7323.92.00.20	20	Bakeware (cookware not suitable for stove top use)	No. kg
7323.92.00.40	40	Other	No. kg
7323.93.00		Of stainless steel		2% 1/	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	40%
		Cooking and kitchen ware:
7323.93.00.15	15	Teakettles	No. kg
		Other:
		Cooking ware:
7323.93.00.35	35	Bakeware (cookware not suitable for stove top use)	No. kg
7323.93.00.45	45	Other	No. kg
7323.93.00.60	60	Kitchen ware	No. kg
7323.93.00.80	80	Other	No. kg
7323.94.00		Of iron (other than cast iron) or steel, enameled		2.7% 1/ 1/	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	35.5%
		Cooking and kitchen ware:
		Of steel:
7323.94.00.10	10	Teakettles	No. kg
		Other:
		Cooking ware:
7323.94.00.21	21	Bakeware (cookware not suitable for stove top use)	No. kg
7323.94.00.26	26	Other	No. kg
7323.94.00.30	30	Kitchen ware	No. kg
7323.94.00.40	40	Other	No. kg
7323.94.00.80	80	Other	No. kg
7323.99		Other:
		Coated or plated with precious metal:
7323.99.10	00	Coated or plated with silver	No. kg	Free 1/ 1/		50%
7323.99.30	00	Other	No. kg	8.2% 1/	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	65%
		Not coated or plated with precious metal:
7323.99.50		Of tinplate		Free 1/		40%
7323.99.50.30	30	Kitchen or tableware suitable for food or drink contact	No. kg
7323.99.50.60	60	Other	No. kg
		Other:
7323.99.70	00	Cookingware	No. kg	5.3% 1/	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	40%
7323.99.90		Other		3.4% 1/ 1/	Free (A*, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	40%
7323.99.90.30	30	Kitchen or tableware suitable for food or drink contact	No. kg
7323.99.90.40	40	Gates for confining children or pets	No.
7323.99.90.80	80	Other	No.
7324		Sanitary ware and parts thereof, of iron or steel:
7324.10.00		Sinks and wash basins, of stainless steel		3.4% 1/ 1/	Free (A*, AU, BH, C, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	40%
7324.10.00.10	10	Stainless steel sinks with one or more drawn bowls (basins)	No.
7324.10.00.50	50	Other	No.
		Baths:
7324.21		Of cast iron, whether or not enamelled:
7324.21.10	00	Coated or plated with precious metal	No.	Free 1/		20%
7324.21.50	00	Other	No.	Free 1/		40%
7324.29.00	00	Other	No.	Free 1/ 1/		40%
7324.90.00	00	Other, including parts	No.	Free 1/ 1/		40%
7325		Other cast articles of iron or steel:
7325.10.00		Of nonmalleable cast iron		Free 1/		10% 1/
7325.10.00.10	10	Manhole covers, rings and frames	kg
7325.10.00.20	20	Catch basins, grates and frames	kg
7325.10.00.25	25	Cleanout covers and frames	kg
7325.10.00.30	30	Valve and service boxes	kg
7325.10.00.35	35	Meter boxes	kg
7325.10.00.80	80	Other	kg
		Other:
7325.91.00	00	Grinding balls and similar articles for mills	kg	2.9% 1/ 1/	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
7325.99		Other:
7325.99.10	00	Of cast iron	kg	Free 1/ 1/		20%
7325.99.50	00	Other	kg	2.9% 1/ 1/	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
7326		Other articles of iron or steel:
		Forged or stamped, but not further worked:
7326.11.00	00	Grinding balls and similar articles for mills	kg	Free 1/ 1/		27.5%
7326.19.00		Other		2.9% 1/ 1/	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
7326.19.00.10	10	Forged	kg
7326.19.00.80	80	Other	kg
7326.20.00		Articles of iron or steel wire		3.9% 1/ 1/	Free (A, AU, B, BH, C, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	45%
7326.20.00.10	10	Belts and belting	kg
7326.20.00.20	20	Garment hangers	No.
7326.20.00.30	30	Sod staples, U staples, irrigation staples, ground staples, and ground pins	No.
7326.20.00.40	40	Double loop bar ties and double loop wire ties	No.
7326.20.00.55	55	Paint roller frames	No.
7326.20.00.90	90	Other	No.
7326.90		Other:
7326.90.10	00	Of tinplate	No. kg	Free 1/ 1/		45%
		Other:
7326.90.25	00	Cable or inner wire for caliper and cantilever brakes and casing therefor, whether or not cut to length	kg	Free 1/ 1/		45%
7326.90.35	00	Containers of a kind normally carried on the person, in the pocket or in the handbag	doz.	7.8% 1/ 1/	Free (AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	110%
7326.90.45	00	Horse and mule shoes	kg	Free 1/ 1/		10%
		Other:
7326.90.60	00	Coated or plated with precious metal	No. kg	8.6% 1/ 1/	Free (A, AU, BH, CL, CO, D, E, IL, JO, KR, MA, OM, P, PA, PE, S, SG)	65%
7326.90.86		Other		2.9% 1/ 1/	Free (A, AU, B, BH, CL, CO, D, E, IL, JO, JP, KR, MA, OM, P, PA, PE, S, SG)	45%
7326.90.86.05	05	Rods for electrical grounding	kg
7326.90.86.10	10	Laminated goods consisting of two or more flat-rolled sheets of iron or steel held together with an adhesive or having a core of non-metallic material	kg
7326.90.86.30	30	Hangers and similar supports for tubes and pipes	kg
7326.90.86.35	35	Fence posts, studded with corrugations, knobs, studs, notches or similar protrusions, with or without anchor plates	kg
7326.90.86.45	45	Barbed tape	kg
7326.90.86.60	60	Ladders	No.
7326.90.86.75	75	Paint roller frames (other than of iron or steel wire)	No.
7326.90.86.76	76	Metal handles for brooms, mops, paint applicators and similar products	No.
7326.90.86.77	77	Burial caskets	No.
7326.90.86.88	88	Other 1/	kg

SECTION XV

BASE METALS AND ARTICLES

OF BASE METAL

XV-1

Notes

1. This section does not cover:
- (a) Prepared paints, inks or other products with a basis of metallic flakes or powder (headings 3207 to 3210, 3212, 3213 or 3215);
- (b) Ferrocerium or other pyrophoric alloys (heading 3606);
- (c) Headgear or parts thereof of heading 6506 or 6507;
- (d) Umbrella frames or other articles of heading 6603;
- (e) Goods of chapter 71 (for example, precious metal alloys, base metal clad with precious metal, imitation jewelry);
- (f) Articles of section XVI (machinery, mechanical appliances and electrical goods);
- (g) Assembled railway or tramway track (heading 8608) or other articles of section XVII (vehicles, ships and boats, aircraft);
- (h) Instruments or apparatus of section XVIII, including clock or watch springs;
- (ij) Lead shot prepared for ammunition (heading 9306) or other articles of section XIX (arms and ammunition);
- (k) Articles of chapter 94 (for example, furniture, mattress supports, luminaires and lighting fittings, illuminated signs, prefabricated buildings);
- (l) Articles of chapter 95 (for example, toys, games, sports equipment);
- (m) Hand sieves, buttons, pens, pencil-holders, pen nibs, monopods, bipods, tripods and similar articles or other articles of chapter 96 (miscellaneous manufactured articles); or
- (n) Articles of chapter 97 (for example, works of art).
2. Throughout the tariff schedule, the expression "parts of general use" means:
- (a) Articles of heading 7307, 7312, 7315, 7317 or 7318 and similar articles of other base metal, other than articles specially designed for use exclusively in implants in medical, surgical, dental or veterinary sciences (heading 9021);
- (b) Springs and leaves for springs, of base metal, other than clock or watch springs (heading 9114); and
- (c) Articles of heading 8301, 8302, 8308 or 8310 and frames and mirrors, of base metal, of heading 8306.
In chapters 73 to 76 and 78 to 82 (but not in heading 7315) references to parts of goods do not include references to parts of general use as defined above.
Subject to the preceding paragraph and to note 1 to chapter 83, the articles of chapter 82 or 83 are excluded from chapters 72 to 76 and 78 to 81.
3. Throughout the schedule, the expression "base metals" means: iron and steel, copper, nickel, aluminum, lead, zinc, tin, tungsten (wolfram), molybdenum, tantalum, magnesium, cobalt, bismuth, cadmium, titanium, zirconium, antimony, manganese, beryllium, chromium, germanium, vanadium, gallium, hafnium, indium, niobium (columbium), rhenium and thallium.
4. Throughout the schedule, the term "cermets" means products containing a microscopic heterogeneous combination of a metallic component and a ceramic component. The term "cermets" includes sintered metal carbides (metal carbides sintered with a metal).
5. Classification of alloys (other than ferroalloys and master alloys as defined in chapters 72 and 74):
- (a) An alloy of base metals is to be classified as an alloy of the metal which predominates by weight over each of the other metals.
- (b) An alloy composed of base metals of this section and of elements not falling within this section is to be treated as an alloy of base metals of this section if the total weight of such metals equals or exceeds the total weight of the other elements present.
- (c) In this section the term "alloys" includes sintered mixtures of metal powders, heterogeneous intimate mixtures obtained by melting (other than cermets) and intermetallic compounds.
6. Unless the context otherwise requires, any reference in the tariff schedule to a base metal includes a reference to alloys which, by virtue of note 5 above, are to be classified as alloys of that metal.
7. Classification of composite articles:
Except where the headings otherwise require, articles of base metal (including articles of mixed materials treated as articles of base metal under the General Rules of Interpretation) containing two or more base metals are to be treated as articles of the base metal predominating by weight over each of the other metals. For this purpose:
- (a) Iron and steel, or different kinds of iron or steel, are regarded as one and the same metal;
- (b) An alloy is regarded as being entirely composed of that metal as an alloy of which, by virtue of note 5, it is classified; and
- (c) A cermet of heading 8113 is regarded as a single base metal.
8. In this section, the following expressions have the meanings hereby assigned to them:
- (a) Waste and scrap
  - (i) All metal waste and scrap;
  - (ii) Metal goods definitely not usable as such because of breakage, cutting-up, wear or other reasons.
- (b) Powders
  Products of which 90 percent or more by weight passes through a sieve having a mesh aperture of 1 mm.
9. For the purposes of chapters 74 to 76 and 78 to 81, the following expressions have the meanings hereby assigned to them:
- (a) Bars and rods
Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
Wire bars and billets of chapter 74 with their ends tapered or otherwise worked simply to facilitate their entry into machines for converting them into, for example, drawing stock (wire rod) or tubes, are however to be taken to be unwrought copper of heading 7403. This provision applies mutatis mutandis to the products of chapter 81.
- (b) Profiles
Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
- (c) Wire
Rolled, extruded or drawn products, in coils, which have a uniform solid cross section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross section exceeds one-tenth of the width.
- (d) Plates, sheets, strip and foil
Flat-surfaced products (other than the unwrought products), coiled or not, of solid rectangular (other than square) cross section with or without rounded corners (including “modified rectangles” of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:
-of rectangular (including square) shape with a thickness not exceeding one-tenth of the width;
-of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.
Headings for plates, sheets, strip, and foil apply, inter alia, to plates, sheets, strip, and foil with patterns (for example, grooves, ribs, checkers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.
- (e) Tubes and pipes
Hollow products, coiled or not, which have a uniform cross section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.

Additional U.S. Note

1. For the purposes of this section, the term "unwrought" refers to metal, whether or not refined, in the form of ingots, blocks, lumps, billets, cakes, slabs, pigs, cathodes, anodes, briquettes, cubes, sticks, grains, sponge, pellets, flattened pellets, rounds, rondelles, shot and similar manufactured primary forms, but does not cover rolled, forged, drawn or extruded products, tubular products or cast or sintered forms which have been machined or processed otherwise than by simple trimming, scalping or descaling.

7311.00.00

7311.00.00.30

7311.00.00.60

7311.00.00.90

Export

Invalid HTS Number Format

Agreements